So it is NOT my 4hi/lo Switch...Right?

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

So it is NOT my 4hi/lo Switch...Right?

Printable Version

Blazer Forums >> Mechanical & Maintenance >> Steering, Suspension & Drivetrain >> So it is NOT my 4hi/lo Switch...Right?

Page: [1]

Message

<< Older Topic Newer Topic >>

So it is NOT my 4hi/lo Switch...Right? - 6/19/2007 11:04:02 PM

WisdomRacing

Posts: 55
Joined: 6/18/2007
Status: offline

1997 Jimmy SLT (No Auto 4wd...only hi and low)

So it goes like this. Switch would click and somtimes flash once but no engagement...did this for both high and low. I reset the power. After power reset, the light would flash a few times, and click, but then turn off. After it detected the fault however many required times (25?) it went back to it's old single click and occasional flash. Keep in mind when trying to get it engaged I put it in park, neutral...the whole schpeel. So I'm assuming this means it is NOT the switch correct? Can I also rule out the fuse then, too? I searched and found this brought up plenty of times...but no one really updates with what finally solved the problem.

Anyway thanks for any help guys!