muffler instalation

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

muffler instalation

Printable Version

Blazer Forums >> Modifications >> Performance & Brainstorming >> Headers, Intake, & Exhaust >> muffler instalation

Page: [1]

Message

<< Older Topic Newer Topic >>

muffler instalation - 6/30/2007 7:29:38 PM

WhiteTie BlackJacket

Posts: 386
Joined: 6/8/2007
From: VA
Status: offline

Im thiknin about putting a glasspack on, and was wondering how easy it is to do. It looks to me like it should just bolt on, but Im a beginner w/ this stuff so i dont really know what Im talking about lol. o and the pipe is 2.5 in and out right?

< Message edited by WhiteTie BlackJacket -- 6/30/2007 7:34:31 PM >

_____________________________

Post #: 1

RE: muffler instalation - 7/1/2007 9:00:13 AM

EuroGoldLS

Posts: 3121
Joined: 2/9/2007
From: Princeton, NC, USA
Status: offline

No, its 2.25 out, so for optimum performance you'll have to go with a wider pipe, 2.75 is as good as it gets without killing your backpressure. You'll have to weld the muffler in place, the stock muffler is a bolt on, but is longer than most aftermarket mufflers, you'll need to cut the muffler off (and the braket that it bolts too and weld the new one in place with the new pipe. I recomment taking it to a muffler shop, they have good wleders and will make sure its right.

_____________________________

My theory is that every disrict in the USA tries to send their lying scumbags to either prison or Washington D.C. -rivereye

(in reply to WhiteTie BlackJacket)

Post #: 2

RE: muffler instalation - 7/1/2007 6:14:56 PM

WhiteTie BlackJacket

Posts: 386
Joined: 6/8/2007
From: VA
Status: offline

damn if it needs welded this might not get done so soon after all...thanks for the heads up tho

_____________________________

(in reply to EuroGoldLS)

Post #: 3

RE: muffler instalation - 7/1/2007 7:36:37 PM

WhiteTie BlackJacket

Posts: 386
Joined: 6/8/2007
From: VA
Status: offline

I just had a thought... Ive seen where you can buy the bolt on pieces (flanges right?) so could i just get that welded onto the new muffler instead??

< Message edited by WhiteTie BlackJacket -- 7/2/2007 5:46:28 AM >

_____________________________

(in reply to WhiteTie BlackJacket)

Post #: 4