will they fit??...

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

will they fit??...

Printable Version

Blazer Forum >> Modifications >> Tires and Wheels >> will they fit??...

Page: [1]

Message

<< Older Topic Newer Topic >>

will they fit??... - 7/20/2007 9:39:51 PM

860gmc

Posts: 25
Joined: 5/2/2007
Status: offline

Would i be able to fit 18 " and /or 20" rims on my 96 jimmy with a beltech 3/3 drop (i know i can bolt pattern wise but size wise)??.... if so what tire sizes would u recomend?.....

Post #: 1

RE: will they fit??... - 7/21/2007 1:16:56 PM

hockeykid15

Posts: 125
Joined: 3/28/2007
From: Eden Prairie, MN
Status: offline

20"s may be pushing it a little. but the 18's should fit. i would try to match the overall hight of your current tires to the now ones. if you have some rubbing now go a little smaller. heres a link to play around with possible tire sizes that would work.
http://www.1010tires.com/TireSizeCalculator.asp

enter your current size and then try different sizes until you get a size that is the same or close

hope this helps

(in reply to 860gmc)

Post #: 2

RE: will they fit??... - 7/22/2007 7:31:32 AM

860gmc

Posts: 25
Joined: 5/2/2007
Status: offline

ya it does thnx.. i was talkin to some other guys on another forum site .. and i think im gunna go with 18"x8.5 ADR rims with a 35 mm offset with 255 or 245 / 45 / 18 wheels....

(in reply to hockeykid15)

Post #: 3