ball joints
Login | |
|
|
|
|
|
RE: ball joints - 8/19/2007 10:51:28 AM
|
|
|
RCars2
Posts: 896
Joined: 4/22/2007 From: Wisconsin originally but now im in Phx, AZ Status: offline
|
WAAAY TOO HIGH!!!! The ball joints themselves are only Change them youself, much cheaper and its not hard to do, just takes time is all. There is a how to for breaking down the front end somewhere on the forum that goes pretty in detail. I think the write up was done by dcflux. Do a quick search and you'll find it. Now if your not too mechanically inclined, find a shop with a better shop rate. Sounds like they may be taking ya for a ride with parts and pricing. If you are moving at a good clip you can get everything done in 6 hours, 8 if ya hit problems and the parts are only $40-$50 a side from your local parts place.
_____________________________
-Rob "what fell off of where!?!?!" Repair List: Fender Rubbing Issue Fuel Pump Alignment T-Case <--Fixed Finally
|
|
|
|
|