eng. swap from 1987 S15 truck 2.5 to 91 Blazer 4.3 electrical issues

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

eng. swap from 1987 S15 truck 2.5 to 91 Blazer 4.3 electrical issues

Printable Version

Blazer Forums >> Modifications >> Performance & Brainstorming >> Engine & Internal >> eng. swap from 1987 S15 truck 2.5 to 91 Blazer 4.3 electrical issues

Page: [1]

Message

<< Older Topic Newer Topic >>

eng. swap from 1987 S15 truck 2.5 to 91 Blazer 4.3 elec... - 9/3/2007 4:21:11 PM

rick nielsen

Posts: 1
Joined: 9/3/2007
Status: offline

I have put a 1991 S10 blazer 4.3 into a 1987 S15 truck that had a 2.5. I have changed the wiring harness and computer in the engine compartment. But I have no power going to the computer and the main ground wire for the wiring harness has power coming out of the fuse box. And I am sure there are other issues that I have not come across yet.
Any input on what I need to do to correct these issues would be greatly appreciated.
I am hoping for an answer besides having too rewire the whole underside of the dash.

Thank you Rick

Post #: 1

RE: eng. swap from 1987 S15 truck 2.5 to 91 Blazer 4.3 ... - 10/14/2007 1:41:56 AM

thegr81

Posts: 2621
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline

did you completely swap everything over and hook it up exactly the way it was if you swaped it out and only took certain things then that might be something to look into but on the other hand you said you have power from the fuse box out which means you have power in k do you have the ignition hooked up to it for turn key if you do what does it do? if it does nothing then check your ignition wire to the starter and your power to starter if anything you might have to do a rewire just to clean it up and get it right.

_____________________________

2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"