5.7 swap...

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

5.7 swap...

Printable Version

Blazer Forum >> Modifications >> Performance & Brainstorming >> Engine & Internal >> 5.7 swap...

Page: [1]

Message

<< Older Topic Newer Topic >>

5.7 swap... - 9/28/2007 5:41:11 PM

Lucky13

Posts: 5
Joined: 9/23/2007
Status: offline

I have a 1997 4wd blazer that i want to do a 5.7 swap into from my 4.3 vortec. What all has to me modded for this to work? I know i am going to need a different oil pan, but thats about it. Im more concerned about things such as ECU, transmission, motor mounts, etc. Any help is much appreciated!

Post #: 1

RE: 5.7 swap... - 9/28/2007 5:44:45 PM

swartlkk

Posts: 14308
Joined: 5/1/2005
From: Waterloo, NY
Status: offline

If you get a Vortec 5.7L from a '97 Pickup, you can probably use the PCM and engine wiring harness in your application. From there, you'll probably need an electric fan, modified motor mounts, and save up some money for a hipo tranny rebuild later on down the road. Your trans should hold up so long as you aren't too brutal.

For more specifics, check out the book written by JTR.com. They really don't have a large section on 2nd gen swaps, but they have a bunch of info that still applies.

_____________________________

Kyle-